Zeagle Octo-Z Manuel du propriétaire télécharger pdf (Page 12)

Once your Octo-Z is attached to your regulator and BC, the tank

valve can be turned on to feed air to all of your systems. At this

time you should

listen for any unusual leaks and check all con-

nections for tightness

. If any unusual leaks are heard or any con-

nections are loose, do not dive with your gear until these problems

have been

corrected.

Your Octo-Z is both a BC Inflator and an “Octopus” or “Safe-second”

regulator. You should practice learning the purpose and use of all

the controls on the Octo-Z in safe shallow water before venturing

into more challenging conditions.

Breathing on the Octo-Z:

The Octo-Z is a high performance regulator that will deliver plenty

of breathing air when needed. Because the Octo-Z spends the

greatest portion of the dive out of your mouth, the inhalation effort

is delibera

tely set higher than your primary breathing regulator.

This is to reduce the chance of free-flow if a wave or current hits

the diaphragm while it is out of your mou

th. This means that the

Octo-Z will breath slightly harder than your Zeagle primary 2nd

stage, but this does not reduce its ability to deliver a high volume

of air if required

To begin breathing on the Octo-Z, put the mouthpiece in your

mouth. If you are underwater and you do not have enough air in

your lungs to blow the water out of the Octo-Z, push the Purge

Cover gently inwards to allow compressed air to blow the water out

of the Oc

to-Z for you. Once the housing is clear of water, you can

begin breathing normally.

The rotating couplings on the corrugated hose and the inflator hose

will allow the Octo-Z to comforta

bly position itself.

USING YOUR OCTO-Z

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Pas de commentaire

Zeagle Octo-Z Manuel du propriétaire Page 12